Packers Helmet Stencil

Configure your single-layer stencil below.

Threshold darker

Detail more detail

Add edges as detail increases

Length: - Islands: b/w - w/b -

Using the Stencils

Cut out and paint your 4-layer CMYK stencil of Packers Helmet on a craft or laser cutter. Download the cut files to cut this stencil of Packers Helmet yourself. Or upload your own image to turn it into a stencil.

Upload Photo

Remove background

Choose Image

Use the blue handles to crop as closely as you can.

We'll send your stencilized image to this email in about 2 minutes.

By uploading, you agree to the terms and conditions.

Cut it yourself

Download all SVG files needed to cut the stencils.

Your custom SVG download

For basic stencils, the defaults are fine.
To customize your download, open each drawer to edit.

panel(s) per layer

Final image is (w) x (h) inches

Stencils smaller than 5 inches on either side are not recommended.

inches

Final image dimensions (side-to-side, top-to-bottom) of your painted stencil.
Cut media are x , with margin inches

Margin must be less than half the media height or width, whichever is smaller.

Media width (in)

Media height (in)

Media margin (in)

Media dimensions (what you cut your stencil panels from), including desired margin (the space along the edge that won't be cut).
Bridges smaller than 0.01 inches or larger than a half-inch will probably not result in a usable stencil.

Stable bridges

Fewer bridges, pretty stable

One bridge per island

No bridges

Bridge Width (in)

Bridge width is usually set from 0.04 (for laser cutter) to 0.06 or larger (for blade cutters).

panel(s) per layer = panels total.

FREE!

Tip #7:

Buildings

Buildings and landmarks come out great. Shoot 'em in the middle of the day, so the shadows fall in the windows and doorways. Is there a special home or landmark in your past?

Packers Helmet Stencil

Using the Stencils

Upload Photo

Check this box to remove the background of the image.

Your custom SVG download