Cut out and paint your 4-layer CMYK stencil
of Pittsburgh Penguins on a craft or laser cutter.
Download the cut files to cut
this stencil of Pittsburgh Penguins
yourself. Or upload your own image to turn it into a stencil.
Upload Photo
Cut it yourself
Download all SVG files needed to cut the stencils.
Your custom SVG download
For basic stencils, the defaults are fine.To customize your download, open each drawer to edit.
panel(s) per layer
Final image is (w) x
(h) inches
Stencils smaller than 5 inches on either side are not recommended.
edit
inches
Final image dimensions (side-to-side, top-to-bottom) of your painted stencil.
Cut media are x , with margin inches
Margin must be less than half the media height or width, whichever is smaller.
edit
Media dimensions (what you cut your stencil panels from), including desired margin (the space along the edge that won't be cut).
Bridges smaller than 0.01 inches or larger than a half-inch will probably not result in a usable stencil.
edit
Bridge width is usually set from 0.04 (for laser cutter) to 0.06 or larger (for blade cutters).
No matter how simple or intricate, your logo looks great as a stencil. Upload your full-size logo graphic to the Stencilizer, and see for yourself. You can download a vector graphic of the fully bridged stencil, and cut it yourself, or you can have us cut it for you.