Bridged Layers

The bridged layers are specially made so that they won't fall apart or lose 'islands' when you cut them.

Layer 1

snow

Layer 2

black

Using the Stencils

Cut out and paint your two-layer stencil of Skull and Crossbones. Decide whether you will use the natural surface color as one of your layers. For example, if your surface color is close to the color snow , then you may choose to omit the first layer since the surface has this color already. Download the free cut files to cut this stencil of Skull and Crossbones yourself. Or upload your own image to turn it into a stencil.

Upload Photo

Remove background

Choose Image

Pick an image and crop it as closely as you can.

We'll send your stencilized image to this email in about 3 minutes.

By uploading, you agree to the terms and conditions.

Your custom SVG download

For basic stencils, the defaults are fine.
To customize your download, open each drawer to edit.

panel(s) per layer

Final image is (w) x (h) inches

Stencils smaller than 5 inches on either side are not recommended.

inches

Final image dimensions (side-to-side, top-to-bottom) of your painted stencil.
Cut media are (w) x (h) inches, with margin inches

Margin must be less than half the media height or width, whichever is smaller.

Media width (in)

Media height (in)

Media margin (in)

Media dimensions (what you cut your stencil panels from), including desired margin (the space along the edge that won't be cut).
Bridges smaller than 0.01 inches or larger than 1 inch will probably not result in a usable stencil.

Stable bridges

Fewer bridges, pretty stable

One bridge per island

No bridges

Bridge Width (in)

Bridge width is usually set from 0.03 (for laser cutter) to 0.06 or larger (for blade cutters).

2 layers x panel(s) per layer = panels total.

Recent

Missing something? Check your email for links.

Tip #18:

Your logo on a latte

Steamed milk makes a great surface to stencil a logo or simple image on. It's like clipart for coffee. Any simple two-tone color separation will work. Your steamed milk is the white surface, so you just use the dark stencil layer to sprinkle the cocoa or cinnamon onto the surface, and you're done.
All tips

Floppiness	6.45	stencil is stable, not too floppy
Cut Length	2.17	stencil will probably cut in reasonable time
Cavities	17	not too many holes

Floppiness	6.59	stencil is stable, not too floppy
Cut Length	1.67	stencil will probably cut in reasonable time
Cavities	12	not too many holes

Skull and Crossbones Stencil

Description

Bridged Layers

Layer 1

Layer 2

Using the Stencils

Upload Photo

Recent

Skull and Crossbones Stencil

Description

Choose Options

Bridged Layers

Layer 1

Bridged Layer 1

Characteristics for Layer 1

Layer 2

Bridged Layer 2

Characteristics for Layer 2

Using the Stencils

Upload Photo

Check this box to remove the background of the image.

Your custom SVG download

Unlock SVG download

Recent